OEM Syringe Pump
Model NE-500
NE-500 does not come with a
power supply. Please see OEM Starter Kit and OEM Net below
- Computer controllable: networkable up to 100 pumps
- Stand-alone operation: pre-program the pump with a
dispensing program, then operate the pump from an attached
Foot Switch, button, or I/O controller
- Add the OEM Starter Kit to run as a fully functional,
stand-alone pump
Description:
- Does not have a built-in user interface
- Chassis mountable: 9 1/2"L x 4 1/4"W x 4 1/8"H (23.5 x
10.8 x 10.5 cm)
- Operates from a 12V DC power source
- Holds 1 syringe up to 60 cc
- Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100
ml/hr (60 cc syringe)
- Includes all the advanced
functions and programming features of the NE-1000 family
- Download free pump terminal emulator
- Custom modifications to the mechanics and firmware are
available
Open chassis design easily mounts into your system
Features:
- Built for Automation
- Operates from a computer
- Infusion and withdrawal
- Set a single pumping rate and/or dispensing volume
- Program up to 41 pumping phases that change pumping
rates, set dispensing volumes, insert pauses, control and
respond to external signals, sound the buzzer
- Network, control, and monitor up to 100 pumps with one
computer
- Motor stall detection available in NE-501 model ($550)
- Dispensing accuracy of ± 1%
- Unlimited lifetime technical support
- Two year warranty
High pressure notes:
The NE-500 produces about 15 lbs of linear force at top speed
and about 35 lbs at slow speeds. 10 ml/hr is an example of slow
speed. The pressure that can be generated is relative to the
syringe size. On a 60 ml syringe, this would roughly produce
about 30 psi
The high pressure version, NE-510, will approximately double the
pumping force at the same speeds.
Example Flow Rates (NE-500):
|
|
|
Syringe Size (cc)
|
Maximum Rate (mL/hr)
|
Minimum Rate (µL/hr)
|
| 0.5 µL |
25.49 |
0.001 |
| 1 |
53.09 |
0.73 |
| 3 |
192.5 |
2.646 |
| 5 |
406.1 |
5.581 |
| 10 |
600 |
8.244 |
| 20 |
975.8 |
13.41 |
| 30 |
1282 |
17.63 |
| 60 |
2120 |
29.13 |
|
Need higher flow
rates?
Give us a call, we have other
models available |
| Sample syringe configurations, can hold any size
syringes below 60 cc. |
| |
|
|
| The NE-500L includes an extra long
chassis on the NE-500 that will hold and
allow 140 ml syringe to open to its full
length |
|
|
|
| The NE-501 includes an optical encoder
on the NE-500 that will detect and stop the
motor during a stall. Typically used in high
pressure applications where there is a risk
of exceeding the maximum force specified.
Without the optical encoder, the pump will
continue to cog the event of a stall. |
|
|
|
| The NE-501L includes an extra long
chassis on the NE-501 that will hold and
allow 140 ml syringe to open to its full
length with stall detection |
|
| NE-510 High Pressure Variant
(Motor Upgrade) |
|
Example Flow Rates (NE-510):
|
|
| Syringe
Size (cc) |
Maximum Rate (mL/hr) |
Minimum Rate (µL/hr)
|
| 0.5 µL |
91.83 |
0.001 |
| 1 mL |
191.2 |
1.459 |
| 3 |
693.4 |
5.291 |
| 5 |
1462 |
11.17 |
| 10 |
2160 |
16.49 |
| 20 |
3514 |
26.82 |
| 30 |
4619 |
35.25 |
| 60 |
7635 |
58.26 |
|
Need higher flow rates?
Give us a call, we have other
models available |
Do you need an upgrade
for your Syringe Pump? |
|
Extra Features:
X upgrade is Linear/Gradient flow rate ramping,
additional advanced programming possibilities, and
additional i/o functions, expansion port, attach
external switches, sub program selection structure,
speed control switch
|
Extra Features:
X2 upgrade includes all features of the X model plus
increases the number of programmable phases from 41 to
340, and increases the max RS-232 baud rate to 38,400
|
|
|
|
|
|
Description:
- Allows user to interactively communicate to
the pump with a computer
- Includes: power supply, Pump-to-PC
network cable (CBL-PC-PUMP-7), user manual
|
|
|
| Power supply and secondary cable only.
For use when networking two or more OEM
NE-500 syringe pumps together. Must use the
secondary cable in order to complete this
application. |
|
|
|
|
|
Description:
- Start, stop, or trigger the next phase on
your syringe pump
- Attach to an NE-500 to allow stand-alone
operation
- Utilizes the TTL logic port on syringe pump
- Quick and simple setup
|
|
|
