NE-1000 Programmable Syringe Pump
Single Syringe Pump
Description:
- Holds 1 Syringe up to 60 cc*
- Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
- Easy-to-use keypad interface
- Space Saving Chassis: Foot print size of only 5 3/4" x 8
3/4"
Won't take up unnecessary space on your laboratory or production bench - Includes all the advanced functions and programming features of the NE-1000 family
Special Application: Continuous Infusion (Push-Pull) and Dual Syringe Pump
Using 2 NE-1000 pumps attached with a cable, one pump will
infuse while the other pump refills or have simultaneous
infusion.
Features:
- Fully programmable; automation capable
- Operates stand-alone or from a computer
- Infusion and withdrawal
- Set a single pumping rate and/or dispensing volume
- Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
- Network, control, and monitor up to 100 pumps with one computer
- Motor stall detection
- Dispensing accuracy of +/-1%
- Unlimited lifetime technical support
- Two year warranty
Example Flow Rates (NE-1000): |
||||||||||||||||||||||||||||
|
Need higher flow
rates? Give us a call, we have other models available |
|||||||||||||||||||||||||||
Sample syringe configurations, can hold any size
syringes below 60 cc. Maximum syringe size:Although a maximum of a 60 cc syringe is specified, the pump can hold up to a 140 cc syringe but can only open up to about 120 cc lengthwiseHigh pressure notes:The NE-1000 produces about 15 lbs of linear force at
top speed and about 35 lbs at slow speeds. 10 ml/hr is
an example of slow speed. The pressure that can be
generated is relative to the syringe size. On a 60 ml
syringe, this would roughly produce about 30 psi |
||||||||||||||||||||||||||||
NE-1010 High Pressure Variant (Motor Upgrade) |
||||||||||||||||||||||||||||
Example Flow Rates (NE-1010): |
||||||||||||||||||||||||||||
|
Need higher flow
rates? Give us a call, we have other models available |
|||||||||||||||||||||||||||
Do you need an upgrade for your Syringe Pump? |
||||||||||||||||||||||||||||
Model: FW-1-X |
Price: add US $105 to any NE-1000 model |
|||||||||||||||||||||||||||
| Extra Features: X upgrade is
Linear/Gradient flow rate ramping, and additional
advanced programming possibilities. |
||||||||||||||||||||||||||||
Model: FW-1-X2 |
Price: add US $205 to any NE-1000 model |
|||||||||||||||||||||||||||
| Extra Features: X2 upgrade
includes all features of the X model plus increases the
number of programmable phases from 41 to 340, and
increases the max RS-232 baud rate to 38,400
|
||||||||||||||||||||||||||||
Sample syringe configurations, can hold any size syringes below 60 cc. |
||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||
